Cadman Cranes Expands Fleet With Liebherr LTM 1230-5.1

30-Second Takeaway

Cadman Cranes has added a Liebherr LTM 1230-5.1 to its fleet, increasing lifting capacity to 230 tonnes and extending reach with a 75-metre telescopic boom. Now the largest crane in Cadman’s lineup, the 5-axle all-terrain crane is powered by sustainable HVO fuel and advanced eco-efficiency technology. The crane will be available for customer projects starting December 2, supporting high-reach, high-capacity lifts across East Anglia and beyond.

Largest Crane in Cadman’s Fleet

Cadman Cranes has taken delivery of a Liebherr LTM 1230-5.1, marking a significant expansion of its heavy-lift capabilities. The 230-tonne all-terrain crane is now the largest crane in the company’s fleet, giving Cadman customers access to greater reach, higher hook heights, and increased lifting performance for complex projects.

In addition to its lifting power, the LTM 1230-5.1 aligns with Cadman’s sustainability goals. The crane operates on HVO (Hydrotreated Vegetable Oil) fuel, significantly reducing CO₂ emissions while maintaining full performance. Combined with Liebherr’s fuel-saving technologies, the crane minimizes fuel consumption without compromising productivity.

The new crane will be available for hire beginning December 2.

VarioBase® and Asymmetrical Support Technology

The LTM 1230-5.1 places Liebherr’s multi-award-winning VarioBase® support system at the core of its structural design. This crane is the first Liebherr mobile crane to feature an asymmetrical support base, allowing each outrigger to be set independently based on site constraints.

Using real-time calculations from Liebherr’s LICCON control system, the crane automatically determines maximum lifting capacities for each individual support configuration. This results in:

• Significantly higher lifting capacities

• Enhanced safety on restricted sites

• Optimized performance, particularly in the rear working area over the supports

VarioBase® Plus combines VarioBase with the asymmetrical support design, offering unprecedented flexibility for lifts in confined or irregular jobsite conditions.

Built for Height, Reach, and Heavy Lifting

The LTM 1230-5.1 is equipped with an exceptionally long 75-metre telescopic boom, setting new standards for five-axle mobile cranes. With lattice boom extensions installed, the crane achieves a maximum hook height approximately 10% higher than its predecessor.

This configuration makes the crane particularly well suited for:

• Tower crane erection and dismantling

• Wind turbine maintenance

• High-reach industrial installations

• Projects requiring large hook heights with the boom fully raised

Despite its size and capacity, the crane maintains the mobility advantages of a five-axle platform, making it efficient to transport and quick to set up on site.

Key Specifications at a Glance

• Maximum lifting capacity: 230 tonnes

• Telescopic boom: 75 metres

• Axles: 5

• Support technology: VarioBase® Plus with asymmetrical support base

• Fuel: HVO-compatible with eco-efficiency systems

Sustainability as a Core Strategy

Cadman Cranes has positioned sustainability as a central pillar of its fleet strategy. By operating the LTM 1230-5.1 on HVO fuel and leveraging Liebherr’s advanced efficiency technologies, the company continues to reduce emissions while meeting customer demands for high-performance lifting solutions.

Cadman recognizes climate change as one of the most significant challenges facing the industry and has committed to:

• Reducing overall resource consumption

• Minimizing environmental and biodiversity impact

• Achieving net-zero emissions in the shortest feasible timeframe

The addition of the LTM 1230-5.1 reinforces Cadman’s leadership role in sustainable crane operations.

About Cadman Cranes

Cadman Cranes is a leading crane hire company based in East Anglia, with more than 50 years of experience delivering safe, reliable, and high-quality lifting solutions. The company serves a wide range of sectors, including construction, infrastructure, energy, and industrial projects, and is recognized for its commitment to safety, innovation, and environmental responsibility.

About Liebherr-Werk Ehingen GmbH

Liebherr-Werk Ehingen GmbH is one of the world’s leading manufacturers of mobile and crawler cranes. Its product range spans lifting capacities from 35 tonnes to 3,000 tonnes, supported by a global service network. The Ehingen facility employs approximately 5,000 people and recorded a turnover of €2.81 billion in 2023.

Learn More🔗 https://www.liebherr.com

About the Liebherr Group

The Liebherr Group is a family-owned global technology company operating across 13 product segments, including construction machinery, mining equipment, and aerospace systems. Founded in 1949, Liebherr employs over 50,000 people worldwide and generated more than €14 billion in revenue in 2023.

Learn More🔗 https://www.liebherr.com

Frequently Asked Questions

What makes the LTM 1230-5.1 unique in Cadman’s fleet?

It is the largest crane Cadman Cranes has ever operated, offering a 230-tonne capacity and a 75-metre telescopic boom.

What is VarioBase® Plus?

VarioBase® Plus combines independent outrigger positioning with an asymmetrical support base, allowing the crane to maximize lifting capacity even on constrained sites.

Why is HVO fuel important?

HVO fuel significantly reduces CO₂ emissions compared to traditional diesel while maintaining full crane performance.

What types of projects is this crane best suited for?

Tower crane erection, wind turbine maintenance, high-reach construction, and heavy industrial lifts.

When is the crane available for hire?

The LTM 1230-5.1 will be available starting December 2.